TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 1 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? applications ? distribution amplifiers ? multidwelling units ? drop amplifiers ? singleended gain block ? ftth receivers sot89 package product features functional block diagram ? 502600 mhz bandwidth ? low noise figure: 2.4 db up to 1600 mhz ? extremely flat gain response ? low power consumption: 100 ma with 5 v ? sot89 package general description pin configuration the TAT7460 is a 75 ohm rf amplifier designed for use up to 2600 mhz, addressing the catv and satellite bands in a single part. the TAT7460 is fabricated using 6inch gaas phemt technology to optimize performance and cost. ordering information part no. description TAT7460 75 high linearity phemt amplifier (lead free/rohs compliant sot 89 pkg) TAT7460eb amplifier evaluation board standard t/r size = 1000 pieces on a 7 reel. pin # symbol 1 rf in 2 gnd 3 rf out 4 gnd paddle rf in gnd rfout
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 2 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? specifications absolute maximum ratings 1 parameter rating device voltage +10.0 v operating temperature 40 to +85 o c storage temperature 65 to +150 o c notes: 1. operation of this device outside the parameter rang es given above may cause permanent damage recommended operating conditions parameter min typ max units v dd 5 v i dd 100 120 ma t j (for > 10 6 hours mttf) 150 o c electrical specifications are measured at specified test conditions. specifications are not guaranteed over all recommen ded operating conditions. electrical specifications test conditions unless otherwise noted: 25 oc case temperature, +5 v v dd parameter conditions min typical max units operational frequency range 50 2600 mhz gain 16.5 db gain flatness +/ 0.5 db noise figure see note 1 2.5 db input return loss 18 db output return loss 18 db cso see note 2. 61 dbc ctb see note 2. 72 dbc xmod see note 2. 71 output ip2 see note 3. 58 dbm output ip3 see note 3. 36 dbm p1db 20.5 dbm v supply +5 v i dd 100 120 ma thermal resistance (jnt to case) jc 51 o c/w notes: 1. up to 1600 mhz 2. 30 dbmv/ch at output, 80 ch flat 3. 5 dbm/tone output with 100 mhz tone spacing
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 3 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? application circuit reference design 50-2600 mhz j1 rf input rfoutput c1 c5 c6 c4 c2 c3 j3 l1 l2 l4 l3 u1 330 pf 0.7 pf 0.7 pf TAT7460 330 pf 0.01 uf dnp 2.4 nh 2.7 nh bead 880 nh j2 c7 dnp application circuit bom 50-2600 mhz bill of material ref. desg. value description manufacturer part number u1 75 phemt amplifier triquint TAT7460 c1, c4 330 pf ceramic cap, 0402, 50 v, 5% various c5, c6 0.7 pf ceramic cap, 0402, 50 v, 0.1 pf vari ous c2 0.01 uf ceramic cap, 0402, x7r, 16 v, 5 % variou s l1 2.4 nh wirewound ind, 0402, 5% various l2 2.7 nh wirewound ind, 0402, 5% various l3 880 nh wirewound ind, 1206, 5% various l4 bead ferrite bead, 0402, 200 ma, 1.0 murata blm15ag102sn1 r1 0 thick film res, 1206 various j1, j2 connector fconnector various j3 header header connector various c3, c7 dnp do not place part
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 4 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? application board layout r1 u1 l3 j1 j2 j3 c3 c6 c5 l1 l2 l4 c2 c7 c4 c1
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 5 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? application board typical performance v dd = +5 v, i dd = 100 ma, temperatures measured at the case of the device 12 13 14 15 16 17 18 19 20 100 600 1100 1600 2100 2600 s21 (db) frequency (mhz) gain 40 c 25 c 85 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 300 650 1000 1350 1700 nf (db) frequency (mhz) noise figure 40 c 25 c 85 c 40 35 30 25 20 15 10 5 0 100 600 1100 1600 2100 2600 s11 (db) frequency (mhz) input return loss 40 c 25 c 85 c 40 35 30 25 20 15 10 5 0 100 600 1100 1600 2100 2600 s22 (db) frequency (mhz) output return loss 40 c 25 c 85 c 55 57 59 61 63 65 25 125 225 325 425 525 625 cso (dbc) frequency (mhz) cso 30 dbmv/ch output with 80 ch ntsc flat loading 40 c 25 c 60 c 30 40 50 60 70 80 90 25 125 225 325 425 525 625 ctb (dbc) frequency (mhz) ctb 30 dbmv/ch output with 80 ch ntsc flat loading 40 c 25 c 85 c
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 6 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? application board typical performance (continued) v dd = +5 v, i dd = 100 ma, temperatures measured at the case of the device 65 67 69 71 73 75 25 125 225 325 425 525 625 xmod (dbc) frequency (mhz) xmod 30 dbmv/ch output with 80 ch ntsc flat loading 40 c 25 c 60 c mechanical information package information and dimensions this package is leadfree/rohscompliant. the plat ing material on the leads is 100% matte tin. it is com patible with both leadfree (maximum 260 c reflow temperature) and lead (maximum 245 c reflow temperature) soldering processes. the TAT7460 will be marked with a TAT7460 designator and an 8 digit alphanumeric lot code (xxxxyyww). the first four digits are the lot code (xxxx). the last four digits are a date code consi sting of the year and work week (yyww) of assembly.
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 7 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? mounting configuration notes: 1. ground / thermal vias are critical for the proper p erformance of this device. vias should use a .35 m m (#80/.0135) diameter drill and have a final, plated thru diameter of .25 mm (.010 ). 2. add as much copper as possible to inner and outer l ayers near the part to ensure optimal thermal perfo rmance. 3. rf trace width depends upon the pc board material a nd construction. 4. all dimensions are in millimeters (inches). angles are in degrees. product compliance information esd information esd rating: class 1a+ value: passes 450 v min. test: human body model (hbm) standard: jedec standard jesd22a114 esd rating: class iv value: passes 1000 v min. test: charged device model (cdm) standard: jedec standard jesd22c101 msl rating level 3 at +260 c convection reflow. the part is rated moisture sensitivity level 3 at 2 60c per jedec standard ipc/jedec jstd020. solderability compatible with the latest version of jstd020, le ad free solder, 260 c. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment).
TAT7460 75 5v 50-2600mhz rf amplifier data sheet: rev a 10/27/10 - 8 of 8 - disclaimer: subject to change without notice e ? 2010 triquint semiconductor, inc. connecting the digital world to the global network ? contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about triquint: web: www.triquint.com tel: +1.707.526.4498 email: info-sales@tqs.com fax: +1.707.526.1485 for technical questions and application information : email: sjcapplications.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding t he information contained herein. triquint assumes no responsibility or liab ility whatsoever for any of the information contain ed herein. triquint assumes no responsibility or liability whatsoever f or the use of the information contained herein. th e information contained herein is provided "as is, where is" and with all f aults, and the entire risk associated with such inf ormation is entirely with the user. all information contained herein is subj ect to change without notice. customers should obt ain and verify the latest relevant information before placing orders for triq uint products. the information contained herein or any use of such information does not grant, explicitly or implicitl y, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information its elf or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, lifesavi ng, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe perso nal injury or death.
|
